Banjo, Tecomec Geoline, Raven & Marmit Tank Bulk Head Fittings & Gaskets for Bolted Flanges

FREE DELIVERY ON ALL ORDERS OVER £100.00

Fittings distributed by All Pressure Washers Pressure Sprayers & Cleaning Equipment Direct UK

Click to enlarge image(s)

Banjo BF Series use four bolts for the compression - the bolt heads are are capped and electronically sealed to prevent interior contact with the liquid. Bolted bulkhead fitting are recommended when additional strength is required for gasket sealing or piping stress is of concern. EPDM gaskets are standard with Viton as an option.
Stainless steel fasteners
EDPM gaskets as standard
Polypropylene construction

Click to enlarge image(s)

Banjo BF Series use four bolts for the compression - the bolt heads are are capped and electronically sealed to prevent interior contact with the liquid. Bolted bulkhead fitting are recommended when additional strength is required for gasket sealing or piping stress is of concern. EPDM gaskets are standard with Viton as an option.
Stainless steel fasteners
Polypropylene construction

Viton Gaskets for Bolted Flanges

EPDM Gaskets for Bolted Flanges

Click to enlarge image(s)

Banjo TF Series bulkhead fittings use a exterior nut to compress the gasket against the inside of the tank wall. These bulkheads are threaded on both the outside and the inside. Standard with EPDM gaskets with an option of Viton.

Polypropylene construction