Product Search  ·  Checkout  ·  Home  ·  Track Your Order
Chemical Injectors Pressure Wash Accessories Chemical Injectors Pressure Wash Accessories

FREE DELIVERY ON ALL ORDERS OVER £100.00

All Pressure Washers Pressure Sprayers & Cleaning Equipment Direct UK Suppliers of Chemical Injectors for Pressure Wash Equipment

Chemical Injector - Variable Rate - 3/8" M Threads

Chemical Injector - Variable Rate - 3/8" M Threads

Chemical Injector - Variable Rate - 3/8" M Threads
Click to enlarge image(s)
Max 250 bar
Max temp 90 deg C
1/4" chemical barb
Stainless Steel ball & spring
Brass construction
PA Chemical Injector - Variable Rate - 3/8" M Threads

PA Chemical Injector - Variable Rate - 3/8" M Threads

PA Chemical Injector - Variable Rate - 3/8" M Threads
Click to enlarge image(s)
Max 250 bar
Max temp 90 deg C
1/4" chemical barb
Stainless Steel ball & spring
Brass & Plastic construction



PRICE DOES NOT INCLUDE VAT
PA Chemical Injector - Variable 22mm - 3/8" M Threads for Pressure Washers

PA Chemical Injector - Variable 22mm - 3/8" M Threads for Pressure Washers

PA Chemical Injector - Variable 22mm - 3/8" M Threads for Pressure Washers
Click to enlarge image(s)
PA 21.0180.21 chemical injector is suitable for various pressure washers from different manufacturers and has a variable tap on it to change the amount of chemical with which it takes in. This Chemical Injector valve takes in high pressure water and adds chemical in when the pressure is reduced in the system after this valve, this is usually by using a twin lance that opens the second lance, lowering the pressure and causing this valve to open and let the chemical in.

* 3/8" BSP male high pressure water inlet
* 3/8" BSP high pressure outlet
* Maximum Pressure - 250 Bar
* Maximum Temperature - 90 C
* 1/4" Hose barb with variable chemical system
* Brass bodied Valve
* Hydraulic type fittings
* 11-15 lpm
Chemical Injector - Variable 22mm - 3/8" M Threads

Chemical Injector - Variable 22mm - 3/8" M Threads

Chemical Injector - Variable 22mm - 3/8" M Threads
Click to enlarge image(s)
Max 250 bar
Max temp 90 deg C
1/4" chemical barb
Stainless Steel ball & spring
Brass construction
11-15 lpm
2.1mm
PA Chemical Injector - Variable 22mm - 3/8" M Threads for Pressure Washers

PA Chemical Injector - Variable 22mm - 3/8" M Threads for Pressure Washers

PA Chemical Injector - Variable 22mm - 3/8" M Threads for Pressure Washers
Click to enlarge image(s)
PA 21.0120.21 chemical injector is suitable for various pressure washers from different manufacturers and has a variable tap on it to change the amount of chemical with which it takes in. This Chemical Injector valve takes in high pressure water and adds chemical in when the pressure is reduced in the system after this valve, this is usually by using a twin lance that opens the second lance, lowering the pressure and causing this valve to open and let the chemical in.

* 3/8" BSP male high pressure water inlet
* 3/8" BSP high pressure outlet
* Maximum Pressure - 390 Bar
* Maximum Temperature - 90 C
* 1/4" Hose barb with variable chemical system
* Stainless steel constuction- stainless steel ball & spring
* Hydraulic type fittings
* 11-15 lpm
1.2 mm Stainless Steel Injector

1.2 mm Stainless Steel Injector

1.2 mm Stainless Steel Injector
Click to enlarge image(s)
The 1.2mm Oriface Stainless Steel injector allows for introduction of low chemicel flows. The 1.2mm oriface is small enough so it allows it to be drilled out to suit your specific requirements. 3/8" M inlet & outlet. Max bar 350, 90degrees C, 30 lpm.

The repair Kit including replacement seal. o ring and spring.
TecPro Components Stainless Steel Injectors with Integral Chemical Non Return Valve

TecPro Components Stainless Steel Injectors with Integral Chemical Non Return Valve

TecPro Components Stainless Steel Injectors with Integral Chemical Non Return Valve
Click to enlarge image(s)
TecPro Components high quality 316 stainless steel injector for low, medium or high pressure with integral chemical non return valve. Fit with orifice plate for a tamper proof dosing system.

For orifice plates & seals see panels below


TecPro Components Orifice Plates for Injectors with Integral Chemical Non Return Valve

TecPro Components Orifice Plates for Injectors with Integral Chemical Non Return Valve

TecPro Components Orifice Plates for Injectors with Integral Chemical Non Return Valve
Click to enlarge image(s)
TecPro Components Orifice Plates for Injectors with Integral Chemical Non Return Valve

Without seal ( see panel below)


TecPro Components Seal for Orifice Plates for Injectors with Integral Chemical Non Return Valve

TecPro Components Seal for Orifice Plates for Injectors with Integral Chemical Non Return Valve

TecPro Components Seal for Orifice Plates for Injectors with Integral Chemical Non Return Valve
Click to enlarge image(s)
TecPro Components Orifice Plate Seal


Suttner ST-64 Pre Pump Injector

Suttner ST-64 Pre Pump Injector

Suttner ST-64 Pre Pump Injector
Click to enlarge image(s)
Suttner ST-64 Pre Pump Injector is designed to be used as a pre pump injector. The chemical injection can be stopped at any time just by twisting and pulling up the brass plunger. Ideal unit for flow rates of 5.7 lpm to 15 lpm. 1/2" NPTF inlet, 1/2" NPTM outlet. Comes with chemical pipe and ST-64 filter.